A CMI EDUCATIONAL INSTITUTION
Faculty : Vipin Nair
Vipin Nair (2025)
" A thermodynamic investigation of a cold storage facility based on a modified cascade refrigeration system. Discover Mechanical Engineering 4, 15. (Springer) "
View Paper (DOI: https://doi.org/10.1007/s44245-025-00093-8)
Faculty : Krishnanunni M
Krishnanunni M (2025)
"International Conference on Greener Technologies in Mechanical Engineering (ICGTME-2025), February 3-4, 2025, BITS Pilani, Pilani Campus- ?Impact of Heat Treatment on the Deformation of AA7075 Alloy Sheets. "
Faculty : Arun Sam Varghese
Arun Sam Varghese, Parasuram S, Bose S (2025)
"Tailoring the interfacial performance of epoxy nanocomposites reinforced with modified carbon fibre grafted MWCNTs - MoS2 hybrid. Results in Engineering, 2025;27:106500."
View Paper (DOI: https://doi.org/10.1016/j.rineng.2025.106500)
Faculty : Arun Sam Varghese
Arun Sam Varghese, Meledath Sadanandan S, Thomas LM (2025)
"Synergistic Effect on Mechanical Properties of Glass Fiber Reinforced Epoxy Composites by Simultaneous Interfacial Modification Using Graphene Oxide and Matrix Modification with Multiwalled Carbon Nanotubes. Polym Compos 2025."
Faculty : Arun Sam Varghese
Arun Sam Varghese, Sreekanth MS (2024)
"Investigation on the effect of multiwalled carbon nanotubes in carbon fiber-reinforced epoxy composites manufactured using vacuum infusion process and hand layup process followed by vacuum bagging. Polym Compos 2024;45:1600?18."
Faculty : Arun Sam Varghese
Arun Sam Varghese, Sreekanth MS (2024)
"Evaluation of Improved Tribo-Performance Characteristics of MoS2 functionalized MWCNTs Hybrid reinforced Epoxy Composites for Severe Erosion Conditions. Tribol Int, 2024;197:109766."
Faculty : Arun Sam Varghese
Arun Sam Varghese, Sreekanth MS (2024)
"Effect of molybdenum disulfide functionalized multiwalled carbon nanotubes based hybrid on morphology, mechanical and thermal properties of epoxy nanocomposites. Polym Compos 2024;45:11743."
Faculty : Vipin Nair
Vipin Nair, Anjana Baby, Anoop M.B., Indrajith S., Midhun Murali, Meenakshi B. Nair (2024)
"A comprehensive review of air-cooled heat sinks for thermal management of electronic devices, International Communications in Heat and Mass Transfer, Volume 159, Part B."
View Paper (DOI: https://doi.org/10.1016/j.icheatmasstransfer.2024.108055)
Faculty : G. Jayaprasad
G. Jayaprasad, H. Vishnu Nandan, R. Anish (2024)
" Experimental investigations on the mechanical properties and thermal analysis of coir-paper hybrid composite carry bag material. Materials Letters, Volume 353, 15 Dec 2023. "
View Paper (DOI: https://doi.org/10.1016/j.matlet.2023.135252)
Faculty : R. Anish
G. Jayaprasad, H. Vishnu Nandan, R. Anish (2023)
"Experimental investigations on the mechanical properties and thermal analysis of coir-paper hybrid composite carry bag material. Materials Letters, Volume 353, 15 Dec 2023."
View Paper (DOI: https://doi.org/10.1016/j.matlet.2023.135252)
Faculty : V.C. Midhun
V.C. Midhun, G Jayaprasad, Ajithmon Anto, R. Anish (2023)
"Preparation and characterization study of water hyacinth briquettes. Materials Today: Proceedings, July 2023."
View Paper (DOI: https://doi.org/10.1016/j.matpr.2023.07.157)
Faculty : G. Jayaprasad
V.C. Midhun, G Jayaprasad, Ajithmon Anto, R. Anish (2023)
"Preparation and characterization study of water hyacinth briquettes. Materials Today: Proceedings, July 2023."
View Paper (DOI: https://doi.org/10.1016/j.matpr.2023.07.157)
Faculty : Ajithmon Anto
V.C. Midhun, G Jayaprasad, Ajithmon Anto, R. Anish (2023)
"Preparation and characterization study of water hyacinth briquettes. Materials Today: Proceedings, July 2023."
View Paper (DOI: https://doi.org/10.1016/j.matpr.2023.07.157)
Faculty : R. Anish
V.C. Midhun, G Jayaprasad, Ajithmon Anto, R. Anish (2023)
"Preparation and characterization study of water hyacinth briquettes. Materials Today: Proceedings, July 2023."
View Paper (DOI: https://doi.org/10.1016/j.matpr.2023.07.157)
Faculty : Krishnanunni M
Krishnanunni M., Kiran M., Renji Philipose.,Ajin Elias Alex., & Nair P.R (2023)
"Characterisation of mechanical and thermal properties of copper slag filled composite material with and without coconut fibre. Materials Today: Proceedings, June 2023."
View Paper (DOI: https://doi.org/10.1016/j.matpr.2023.06.054)
Faculty : Kiran M
Krishnanunni M., Kiran M., Renji Philipose.,Ajin Elias Alex., & Nair P.R (2023)
"Characterisation of mechanical and thermal properties of copper slag filled composite material with and without coconut fibre. Materials Today: Proceedings, June 2023."
View Paper (DOI: https://doi.org/10.1016/j.matpr.2023.06.054)
Faculty : Renji Philipose
Krishnanunni M., Kiran M., Renji Philipose.,Ajin Elias Alex., & Nair P.R (2023)
"Characterisation of mechanical and thermal properties of copper slag filled composite material with and without coconut fibre. Materials Today: Proceedings, June 2023."
View Paper (DOI: https://doi.org/10.1016/j.matpr.2023.06.054)
Faculty : Ajin Elias Alex
Krishnanunni M., Kiran M., Renji Philipose.,Ajin Elias Alex., & Nair P.R (0000)
"Characterisation of mechanical and thermal properties of copper slag filled composite material with and without coconut fibre. Materials Today: Proceedings, June 2023."
View Paper (DOI: https://doi.org/10.1016/j.matpr.2023.06.054)
Faculty : Rebith Nair P
Krishnanunni M., Kiran M., Renji Philipose.,Ajin Elias Alex., & Nair P.R (2023)
"Characterisation of mechanical and thermal properties of copper slag filled composite material with and without coconut fibre. Materials Today: Proceedings, June 2023."
View Paper (DOI: https://doi.org/10.1016/j.matpr.2023.06.054)
Faculty : Subin B Markose
Sreejith Jayakumar,Subin B Markose, Vivek Gop[i (2023)
"Performance evaluation of BS3 direct injection diesel engine using diesel and castor biodiesel at different injection pressures, January 2023. Conference: ADVANCES IN MECHANICAL ENGINEERING, INDUSTRIAL INFORMATICS AND MANAGEMENT (AMEIIM2022)"
Faculty : Arun Sam Varghese
Arun Sam Varghese (2023)
"?Vacuum Assisted Resin Transfer Moulding (VARTM) based Manufacturing of Fiber Reinforced Polymer Matrix Composites with Enhanced Mechanical Performance for Advanced Functional Applications? ? National Conference on New Developments in Polymer Materials (DPM-2023), Trivandrum."
Faculty : Midhun V.C
Akhil Krishnan S.R.
, Suresh Sivan (2022)
"Experimental and numerical investigation of solid-solid phase change material assisted heat sink with integrated heat pipe for electronic cooling, Journal of Energy Storage, Volume 59, March 2023, 106494"
Faculty : Kiran M
Kiran M., Venkatesan S.P., Mishra A., Mehendale A., & Sherin H.N (2021)
"A multivariate discrete grey model for estimating the waste from Mobile Phones, Televisions, and Personal Computers in India. Journal of Cleaner Production, 2021."
View Paper (DOI: https://doi.org/10.1016/j.jclepro.2021.126185)
Faculty : Vipin Nair
Vipin Nair (2021)
"HFO Refrigerants: A review of present status and future prospects. International Journal of Refrigeration 122: 156?170."
View Paper (DOI: https://doi.org/10.1016/j.ijrefrig.2020.10.039)
Faculty : Vipin Nair
Vipin Nair, Tailor P.R., Parekh A.D (2020)
"Performance analysis of Al2O3-R718 nanofluid turbulent flow through a flooded chiller tube."
View Paper (DOI: https://doi.org/10.1007/s40430-020-02429-9)
Faculty : Vipin Nair
Vipin Nair, Parekh A.D., Tailor P.R (2020)
"Experimental investigation of a vapour compression refrigeration system using R134a/Nano-oil mixture"
View Paper (DOI: https://doi.org/10.1016/j.ijrefrig.2019.12.009)
Faculty : Vipin Nair
Vipin Nair, Parekh A.D., Tailor P.R (2019)
"Experimental investigation of thermophysical properties of R718 based nanofluids at low temperatures. Heat and Mass Transfer 55: 2769?2784."
View Paper (DOI: https://doi.org/10.1007/s00231-019-02624-y)
Faculty : Vipin Nair
Vipin Nair, Tailor P.R., Parekh A.D (2018)
"Water-based Al2O3, CuO and TiO2 nanofluids as secondary fluids for refrigeration systems.Journal of the Brazilian Society of Mechanical Sciences and Engineering,5 April 2018 Volume 40, article number 262, (2018)"
View Paper (DOI: ?https://doi.org/10.1007/s40430-018-1177-6)
Faculty : Vipin Nair
A.D. Parekh, P.R. Tailor, Vipin Nair (2017)
"Theoretical investigation on thermophysical properties of R141b based nanorefrigerants ? ISECT-2017, Dubai."
View Paper (DOI: https://doi.org/10.15242/DiRPUB.DIR1017007)
Faculty : Vipin Nair
A.D. Parekh, P. Joshi, V. Nair (2017)
"Heat Transfer Enhancement Using Various R718 Based Nanorefrigerants in Air Handling Unit ? FMFP-2017"
Faculty : Vipin Nair
Vipin Nair, Tailor P.R., Parekh A.D (2016)
"Nanorefrigerants: a comprehensive review. Int J of Refrigeration 67:290?307."
View Paper (DOI: https://doi.org/10.1016/j.ijrefrig.2016.01.011)
Faculty : Arun Sam Varghese
Arun Sam Varghese., & Sreejith N.K (2015)
"Structural analysis of bicycle frame using composite laminate. Int J Eng Trends Tech, 28, 321?327."
View Paper (DOI: ISSN: 2231-5381 http://www.ijettjournal.org)
Faculty : Subin B Markose
Subin B Markose, Subin George Mathew (2015)
"Improving Production Efficiency by Modifying Employee Scheduling System at a Palm Oil Industry. IJSTE, Nov 2015"
View Paper (DOI: https://ijste.org/Article.php?manuscript=IJSTEV2I5071)
Faculty : Krishnanunni M
Krishnanunni M and Prabhakaran (2014)
"Tool wear optimization of aluminum alloy using response surface methodology. IJERT, May 2014."
Faculty : Krishnanunni M
Krishnanunni M (2014)
"International Conference on Recent Innovations in Engineering ? Sri Subramanya College of Engineering & Technology, Palani, Mar 2014."
Faculty : Kiran M
Kiran M., Cijo Mathew, Jacob Kuriakose (2014)
"Modified Genetic Algorithm for Vehicle Routing Problem with Simultaneous Pick-Up and Delivery ? M.A. College of Engineering, Jan 2014."
(2014)
"?3D Modelling and Analysis of Micro Gas Turbine Compressor Blade? ? IJMER, Oct 2014."
Faculty : Kiran M
Cijo Mathew, Jacob Kuriakose (2013)
"Modified Savings Algorithm Based Approach for Vehicle Routing Problem ? IJETAE, Oct 2013."
Faculty : Kiran M
Cijo Mathew, Jacob Kuriakose (2013)
"Root Cause Analysis for Reducing Breakdowns ? IJETAE, Jan 2013."
Faculty : Kiran M
Kiran M., Cijo Mathew (2013)
"Savings-Based Approach for Vehicle Routing Problem ? National Conference, Oct 2013."
Faculty : Jayaprasad G
Jayaprasad G., C. Sujatha (2007)
"Reduced-order models for a smart plate? International Journal of Automation and Control ,Vol. 1 No. 3, July 2007."
Faculty : Jayaprasad G
Jayaprasad G., C. Sujatha (2005)
"Two approaches to optimal location of sensors/actuators for active vibration control of square plate? Proc. Int. Conference on Computational & Experimental Engineering and Sciences, IIT Madras, India, 2005, 3173-78"
Faculty : Jayaprasad G
Jayaprasad G., C. Sujatha (2005)
"Location of Sensors/Actuators for active vibration control, based on modal controllability, Proc. Int. Conference on Advances in Materials, Product Design & Manufacturing Systems, December 12-14, BIT, Sathyamangalam, India, 2005, 383-389. "
Faculty : Jayaprasad G
Jayaprasad G., C. Sujatha (2005)
"Model reduction studies on smart plate, Proc. Int. Conference on Advances in Materials, Product Design & Manufacturing Systems, December 12-14, BIT, Sathyamangalam, India, 2005, 157-163"
Faculty : Jayaprasad G
Jayaprasad G (2003)
"Strategies for active vibration control, National seminar on vehicle dynamics, Andhra University Visakhapatnam, February10-11 2003."
Faculty : Jayaprasad G
Jayaprasad G (2003)
"Just in Time, National Conference on Emerging trends in engineering?, Adhiyamaan College of Engineering Hosur, September 8-9 2003"
Faculty : Jayaprasad G
Jayaprasad G (2003)
"Smart materials and structures, National Conference on Advances in manufacturing technology, NSS College of Engineering Palakkad, February15-16, 2003."
Faculty : Jayaprasad G
Jayaprasad G (2003)
"Cepstrum analysis and gear box fault analysis, National Conference on Advances in manufacturing technology, NSS College of Engineering Palakkad, February15-16, 2003"