Granted patent

Jayaprasad G

Design patent

Integrated shredding and incineration device for domestic use Design No. 440662-001; Dated 15/12/2024

Organizer

Jayaprasad G

Indo- European Conference on Advanced Manufacturi ng and Materials Processing (IECAdvaM AP-2023)

First International conference in Department & College

All published research papers are as “First Author”.

Dr. Vipin Nair

Journal paper publications

Published 8 SCI/Scopus-indexed journal articles (First author).

Single- author journal article publication.

Dr. Vipin Nair

Journal paper publications

Published 2 “Single-author” SCI/Scopus indexed journal articles.

500+ research citations

Dr. Vipin Nair

Research citations

Research publications have received 500+ citations (Google Scholar)

Best review paper award by International Journal of Refrigeration

Dr. Vipin Nair

26th International Congress of Refrigeratio n, Paris

Received the best review paper award for publication in International Journal of Refrigeration (Elsevier) by International Institute of Refrigeration, Paris for the year 2021

Approved KTU PhD supervisor

Dr. Vipin Nair

KTU Guideship

Approved KTU PhD supervisor since October 2023.

Design Patent for a new Heat Sink design

Dr. Vipin Nair

Design patent

Design patent on AEROCORE: Radial Fin for efficient Thermal Management [Design Number: 430643-001]

NIT Tenure (8 yrs)

Dr. Vipin Nair

Previous experience

Spent 8 years at premier national-level institutions: 7 years at NIT Surat (M. Tech and PhD) and 1 year at NIT Calicut as a faculty member.

Reviewer of Q1 journals

Dr. Vipin Nair

Peer Review

Reviewer of several Q1 Journals such as International Journal of Refrigeration (Elsevier), International Journal of Heat and Mass Transfer (Elsevier), Applied Thermal Engineering (Elsevier) and Case Studies in Thermal Engineering (Elsevier).

Patent Granted

Dr. Kiran M

Design Patent Applied for “Heliocoil parabolic solar heater”

Design No. 430644-001

First Rank

Dr. Kiran M

Academics

M. G. University M. Tech Degree Examination 2014

Journal of Cleaner Production (SCI Impact Factor – 11.072)

Dr. Kiran M

Journal

A multivariate discrete grey model for estimating the waste from Mobile Phones, Televisions, and Personal Computers in India. Journal of Cleaner Production, 126185.

International Journal of Environment and Waste Management (Scopus)

Dr. Kiran M

Journal

Assessing the disposal practices and urban mining potential of e-waste among the ranked engineering institutions in India to achieve sustainable developments. International Journal of Environment and Waste Management.

International Journal of Business Information Systems (Scopus)

Dr. Kiran M

Journal

A spreadsheet-based decision support tool to assist small and medium sized e-waste and lithium-ion battery recyclers for economic assessment. International Journal of Business Information Systems. (Scopus)

Materials Today: Proceedings (Scopus)

Dr. Kiran M

Journal

Characterisation of mechanical and thermal properties of copper slag filled composite material with and without coconut fibre. Materials Today: Proceedings, 2023. (Scopus)

Patent Granted

Mr. Krishnanunni M

Design Patent Applied for “Heliocoil parabolic solar heater”

Design No. 430644-001

Design Patent approved

Mr. Krishnanunni M

Design Patent Applied for “Under water robot”

Under processing

Patent Granted

Mr. Krishnanunni M

Design Patent Applied for “Parabolic solar water heater”

Design No.428445-001

NPTEL 1% topper Won Elite Silver with a consolidated score of 86%.

Mr. Renji Philipose

NPTEL

NPTEL course on “Manufacturing of Turbines (gas, steam, hydro and wind)”.

Patent Granted

Mr. Renji Philipose

Design Patent Applied for “Heliocoil parabolic solar heater”

Design No. 430644-001

Patent Granted

Mr. Renji Philipose

Design Patent Applied for “Parabolic solar water heater”

Design No.428445-001

NPTEL 1% topper Won Elite Silver with a consolidated score of 83%.

Mr. Arun Jose Tom

NPTEL

NPTEL course on “Toyota Production System”

Patent Granted

Mr. Arun Jose Tom

Design Patent Applied for “Shore Guard: Autonomous Beach Cleaning Robot”

Design No. 430645-001

FDP

Mr. Arun Jose Tom

AICTE ATAL FDP

Progressive Safety Engineering Strategies in Manufacturing & Industrial Applications

FDP

Mr. Arun Jose Tom

AICTE ATAL FDP

AI-Driven Pedagogy: Enhancing Teaching and Learning Experiences

Design Patent on “Heliocoil Parabolic Solar Heater” (Design no- 430644-001)

Mr. Febin Felix

Design Patent

Design Patent on “Heliocoil Parabolic Solar Heater” (Design no-430644-001)

NPTEL elite certificate for the course “Advanced Manufacturing Engineering”

Mr. Febin Felix

NPTEL Certificate

NPTEL elite certificate for the course “Advanced Manufacturing Engineering”

Elite Certification

Mr. Subin B Markose

NPTEL

Management of inventory systems,

Elite Certification

Mr. Subin B Markose

NPTEL

Toyota Production Systems,

Design Patent

Mr. Subin B Markose

Patent

Integrated shredding and incineration device for domestic use,

Elite Certification

Mr. Subin B Markose

NPTEL

Supply Chain Digitization

FDP

Mr. Subin B Markose

AICTE ATAL FDP

Progressive Safety Engineering Strategies in Manufacturing & Industrial Applications

Polymer Composites, Wiley, I.F: 5.2

Mr. Arun Sam Varghese

SCI Journal Publication - 1

Varghese AS, Sreekanth MS. Investigation on the effect of multiwalled carbon nanotubes in carbon fiber-reinforced epoxy composites manufactured using vacuum infusion process and hand layup process followed by vacuum bagging. Polym Compos 2024;45:1600–18. https://doi.org/10.1002/pc.27876.

Tribology International, Elsevier, I.F: 6.2

Mr. Arun Sam Varghese

SCI Journal Publication - 2

Varghese AS, Sreekanth MS. Evaluation of Improved Tribo-Performance Characteristics of MoS2 functionalized MWCNTs Hybrid reinforced Epoxy Composites for Severe Erosion Conditions. Tribol Int, 2024;197:109766. https://doi.org/10.1016/j.triboint.2024.10976 6.

Polymer Composites, Wiley, I.F: 5.2

Mr. Arun Sam Varghese

SCI Journal Publication - 3

Varghese AS, Sreekanth MS. Effect of molybdenum disulfide functionalized multiwalled carbon nanotubes based hybrid on morphology, mechanical and thermal properties of epoxy nanocomposites. Polym Compos 2024;45:11743. https://doi.org/10.1002/pc.28595.[I.F:5.2].

Results in Engineering, Elsevier, I.F 7.9

Mr. Arun Sam Varghese

SCI Journal Publication - 4

Varghese AS, Parasuram S, Bose S, T․P․ S, M․S․ S. Tailoring the interfacial performance of epoxy nanocomposites reinforced with modified carbon fibre grafted MWCNTs - MoS2 hybrid. Results in Engineering, 2025;27:106500. https://doi.org/10.1016/j.rineng.2025.106500 . [I.F: 7.9].

Polymer Composites, Wiley, I.F: 4.7

Mr. Arun Sam Varghese

SCI Journal Publication - 5

Varghese AS, Meledath Sadanandan S, Thomas LM. Synergistic Effect on Mechanical Properties of Glass Fiber Reinforced Epoxy Composites by Simultaneous Interfacial Modification Using Graphene Oxide and Matrix Modification With Multiwalled Carbon Nanotubes. Polym Compos 2025. https://doi.org/10.1002/pc.70379.

Scopus Paper

Mr. Arun Sam Varghese

Scopus Journal Publication - 1

Varghese, A. S., & Sreejith, N. K. (2015). Structural analysis of bicycle frame using composite laminate. Int J Eng Trends Tech, 28, 321-327 [Scopus].

Indian Patent

Mr. Arun Sam Varghese

Utility Patent - 1

Hybrid nanoparticle-based epoxy coating composition for carbon fibre-epoxy composites and Method for producing the same. (Utility Patent: India, 202441078752 A)

Indian Patent

Mr. Arun Sam Varghese

Design Patent - 1

Shore Guard: Autonomous Beach Cleaning Robot. (Design Patent: India, 430645-001)

Indian Patent

Mr. Arun Sam Varghese

Design Patent - 2

AdheTest: Manual Submerged Adhesion Tester Machine with Temperature Control. (Patent Applied)

Indian Patent

Mr. Arun Sam Varghese

Utility Patent - 2

Oxy Dome - A Multi-Purpose and Portable Air Purifier with Simultaneous Air Quality Improvement and Indirect Oxygen Enrichment.

Publication in Scopus Indexed Journal

Mr. Arun Sam Varghese

Raman Research Award -1

Contribution to research through publication in peer-reviewed journals from VIT Vellore

Publication in Scopus Indexed Journal

Mr. Arun Sam Varghese

Raman Research Award -2

Contribution to research through publication in peer-reviewed journals from VIT Vellore

Publication in Scopus Indexed Journal

Mr. Arun Sam Varghese

Raman Research Award -3

Contribution to research through publication in peer-reviewed journals from VIT Vellore

Selected for poster presentation

Mr. Arun Sam Varghese

Poster Presentation

Vacuum Assisted Resin Transfer Moulding (VARTM) based Manufacturing of Fiber Reinforced Polymer Matrix Composites with Enhanced Mechanical Performance for Advanced Functional Applications” at the National Conference on New Developments in Polymer Materials, (DPM-2023), Organized by the Society of Polymer Science, Trivandrum Chapter, at Trivandrum, India.

FDP

Mr. Vipin G Namboothiri

FDP

“Intellectual property right & patent drafting” at Dept. of Mechanical Engineering AMET University

ATAL FDP

Mr. Vipin G Namboothiri

ATAL FDP

“AI-Driven Pedagogy: Enhancing Teaching and Learning Experiences” at Dept. Mechanical Engineering Chanderprahu Jain College of Higher studies

FDP

Mr. Vipin G Namboothiri

FDP

“Developments in Renewable Energy Systems and Technologies” conducted in association with the Indian Society of Technical Education (ISTE) - Kerala Section at Dept. of Mechanical Engineering Musaliar College of Engineering.

FDP

Mr. Vipin G Namboothiri

FDP

“Smart Materials and Digital Advancement for Future Manufacturing System” conducted by Dept. of Mechanical Engineering Easwari Engineering College, Chennai

FDP

Mr. Vipin G Namboothiri

FDP

"Research Trends in Mechanical Engineering" conducted by Department of Mechanical Engineering, Carmel College of Engineering and Technology

Patent Granted

Mr. Vipin G Namboothiri

Design Patent Applied for “OXY MOBILE: Portable Oxygen Extractor”

Design No. 428444-001

Scopus indexed

Mr. Rahul R

Journal publication

“Review of the mechanical properties and thermal analysis of hybrid composite” Subin Sunny a, R. Anish b, H. Vishnu Nandan a, Jackson Scaria Jomon a, R. Shibin a, R. Rahul a https://doi.org/10.1016/j.matpr.2023.07.295

Paper Presented

Mr. Ashin Sabu

International Conference

Presented a paper titled “Fabrication, Testing and Analysis of Hybrid Polymer Matrix Composite- Epoxy Reinforced with E-Glass Fibre, Al2O3” in the International Conference on Advanced Ceramics and Nanomaterials for Sustainable Development

Paper Presented

Mr. Ashin Sabu

International Conference

Presented a paper entitled “Mechanical Characterization of Al2024/SiC Metal Matrix Composites” at the International Conference Advances in Mechanical, Civil and Construction Engineering.

Design Patent Granted

Mr. Ashin Sabu

Design Patent

Integrated shredding and incineration device for domestic use,

Elite Certification

Mr. Rakesh Raj

NPTEL Certification

NPTEL Certification in Thermal Engineering from IIT Guwahati, 2024 with 72% Marks.

Elite Certification

Mr. Rakesh Raj

NPTEL Certification

NPTEL Certification in Refrigeration and Air conditioning from IIT Roorkee, 2024 with75% Marks.

QA/QC Certification

Mr. Rakesh Raj

Certification Course

QA/QC Certification from Techshore Inspection Services, Cochin, Kerala.

, HOD, Lecturer & W/S Superintendent

Mr. George K. V

Academic

More than 33 years of experience in Kerala State Government Service in various Govt: Polytechnic Colleges under Department of Technical Education

Good service entry

Mr. George K. V

Academic

During State Government service

NCC Officer,

Mr. George K. V

Academic

Selected as Commissioned Officer and retired in the Rank equivalent to Captain

Councilor, Junior Red Cross

Mr. George K. V

Academic

During Govt: Service

Co-Ordinator for Literacy Program

Mr. George K. V

Academic

During Govt: Service

Question paper setter for Kerala PSC

Mr. George K. V

Question paper setter

For various Diploma level Posts for multiple times

Question paper setter for Polytechnic Examination

Mr. George K. V

Question paper setter

Question paper setter for Polytechnic Examination by State Board of Technical Examination Kerala

Interview board member

Mr. George K. V

Interview board member

Interview board member of Autokast Ltd (Govt: of Kerala enterprise)

National Award of NCC

Mr. George K. V

NCC

Director General NCCs Commendation

Attended Pre- Commission and Refresher Courses of NCC

Mr. George K. V

NCC

3 times (3 months +1 month+ 1 month) at Officers Training School Kamptee- Maharashtra under Indian Army

Inservice Courses

Mr. George K. V

Inservice Courses

By NITTR Chennai, Sitter Kalamassery, DPI Kerala,

Internal Co- Ordinator of Community Development Through Polytechnic Colleges

Mr. George K. V

Community Developmen t Program

Under Ministry of Humen Recourses, Govt: of India

St: Johns Ambulance Association (headed by Hon: President of India and Hon: Union Health minister

Mr. George K. V

Former member and First aid Certificate holder

Expert committee member

Mr. George K. V

Peoples Plan campaign (Janakeeyas oothranam, ജനകീയാ സൂത്രണം)

For Peoples Plan campaign (Janakeeyasoothranam, ജനകീയാസൂത്രണം) by the ministry of Local bodies Government of Kerala

Technician

Mr. George K. V

FACT Technician

in the FACT Ltd (Govt: of India enterprise)

Patent Granted

Mr. Venu C R

Design Patent Applied for “Grinding machine fixture”

Design No. 432525-001

Patent Granted

Mr. Venu C R

Design Patent Applied for “Ergonomic Mridangam Stand”

Design No. 451135-001